Yuntai R & D process:
The first generation of Yuntai LPG series High speed centrifugal spray drier is general manager and chief engineer Mr. Charles Bo as the autumn of 2006 to participate in Beijing Ahmad Well Show, Denmark and Japan saw two small glass Centrifugal spray drier after being subjected to laboratory prototype inspired, after Denmark and Japan both advanced machine type of careful research, combined with the original Yuntai Centrifugal spray drier problems were from each other, when the prototype equipment manufacturing dimensions as: diameter 800mm, total Height 1800mm; high-speed electronic atomizing disk; and a host stent can be split; and so on ......, product launch, immediately by the customer's favor!
After Yuntai LPG series High speed centrifugal spray drier actual commissioning the installation process, a customer reflects a lack of laboratory lifting equipment, install a bit difficult, as well as laboratory tapped into consideration factors such as equipment, Yuntai company has developed a second generation of LPG series High speed centrifugal spray drier.
The second generation LPG series High speed centrifugal spray drier is an improvement over the first generation, based on the host and the stent manufactured as large vertical High speed centrifugal spray drier, PLC control program. Indirect, beautiful, slim girl like a show in front of customers.
After the customer reflect the proportion of light materials, as well as by a cyclone collector can not collect 0.5% of dust and other issues, Yuntai company has developed a third-generation LPG series High speed centrifugal spray drier.
The third generation ESP experiments with small type Centrifugal spray drier due to the length and breadth in laboratory equipment; noise equipment; dust collection rate, etc. to be considered more thoroughly. Company technicians continue to explore and search for information on similar foreign products, lot of thought come to a unified plan, based on the increase in the first generation of dust collecting devices. Ever since the third generation of ESP experiments with small type Centrifugal spray drier and shows the proportion of light materials to customers.

Product Brief:
Is spray drier process liquid process shaping and drying industry is the most widely used. Ideal for generating powdery, granular solid product from the solution, emulsions, suspensions and pasty liquid feedstock. Thus, when the finished product particle size distribution, residual moisture content, bulk density and particle shape must meet the precision standard, the spray drying is an ideal process.

Stick wall art shows:
● Yuntai spray drier non-stick wall art real video

- This video highlight is when the staff opened the door spray drier, drier still work, but the cabin walls clean as new, Yuntai advanced technology to ensure that the material does not appear sticky wall phenomenon, which is a technical Yuntai the strength of strong evidence, please note that while watching a video.

working principle:
Heated air through a filter and into LPG series High speed centrifugal spray drier at the top of the air distributor, the hot air was uniformly into the drying room in the spiral. Passing through the top of the tower high-speed centrifugal atomizer (rotary) sprayed into the extremely fine mist liquid beads in contact with the hot air stream and in a very short period of time can be dried into a finished product. Finished continuously from the bottom of the drying tower and cyclone exhaust gases vented by the fan.

Features:
◎ LPG series High speed centrifugal spray drier drying speed, greatly increasing the surface area of the material after the liquid is atomized in a stream of hot air, you can instantly evaporate 95% -98% moisture, the drying time of just a few seconds to complete, especially for drying heat sensitive materials.
◎ product has a good uniformity, mobility and solubility, high purity and good quality.
◎ LPG series High speed centrifugal spray drier to simplify the production process, easy to operate controls. For moisture content of 40-60% (for special materials, up to 90%) of the liquid can be dried into a powder product, after drying without crushing and screening to reduce the production processes, improve product purity. For the size, bulk density, moisture, within a certain range can be adjusted by changing the operating conditions, the control and management is very convenient.

Adaptation Material:
Chemical industry: sodium fluoride (potassium), basic dyes Pigment, dye intermediate, compound fertilizer, formic silicic acid, catalyst, sulfuric acid agent, amino acid, white carbon black.
Plastic resin: AB, ABS latex, urea-formaldehyde resins, phenolic resins, dense glue (urea) formaldehyde resins, polyethylene, polyvinyl chloride and the like.
Food industry: fat-rich milk, armpit protein, cocoa milk powder, substitute milk, hunting blood meal, egg white (yellow) and the like.
Food and plants: oats, chicken juice, coffee, instant tea, seasoning meat, protein, soybean, peanut protein, hydrolyzate and so forth.
Sugar: corn syrup, corn starch, glucose, pectin, malt sugar, potassium sorbate.
Ceramics: alumina, ceramic tile material, magnesium oxide, talc and the like.

success case:

Production site:

High speed centrifugal spray drier production site

High speed centrifugal spray drier born manufacturing plant

High speed centrifugal spray drier Health manufacturing site

High speed centrifugal spray drier Health Workshop

Technical Parameters:

Note: The characteristics and thermal evaporation of water and the material inlet, outlet temperature-dependent. When the outlet temperature of 90oC, its water evaporation curve shown above (for the selected type reference), with product updates, relevant parameters to change without prior notice.
LPG series High speed centrifugal spray drier feed liquid Order Information ◎ name, the physical properties: solid content (or water content), viscosity, surface tension, PH value.
After ◎ dried powder capacity, allow the residual water content, particle size, the maximum temperature allowed.
◎ production, opening times of the day.
◎ available energy: vapor pressure for the amount of capacity available for coal, oil, gas.
◎ control requirements: inlet and outlet temperatures need to be controlled.
◎ powder collecting requirements: whether you want to install the trap bag, environmental requirements for exhaust emissions.
◎ other special requirements.

Technical Specifications:

Spray work status